ITT Genesis blowers

ITT Genesis blowers

** We can ship to most parts of Europe - ask us for a quotation! **

The popular Genesis air blowers are made by ITT in Denmark - a great design and built to give many years of service.

Let's start with the number on the body of the unit, as this identifies its motor size, features and functions. If you do not see it listed here, it could be a 'special' - please e-mail us to see if we can help - info @swimfix.co.uk. or telephone 0845 6022 081, our local call rate number.

Here are the units that we supply:

• G50-2NN-S Standard 500 watt motor for an electronic control/touch pad.

• G50-2AN-S Air switch - 500 watt motor with a pneumatic on/off switch.

• G50-2HN-S Heater - 500 watt Genesis hot tub blower for an electronic touchpad, and with built-in heating element to warm the air on start-up.

• G50-AH-S Pneumatic on/off blower with a built-in heating element to warm the air on start-up.

• G50-2VN-S Variable speed - 500 watt Genesis blower with a variable speed control and automatc dry-out run when used in conjunction with the special ITT touch pad number UK 01658a connected directly to the blower. No separate control panel is needed.

• G50-2VH-S Variable speed and heater - 500 watt blower including variable massage mode and automatic dry-out mode when used in conjunction with ITT touch pad UK01658a connected driectly to the blower - no separate control panel is necessary. The blower has a built-in heating element to reduce cold air on start-up.

• G50-2ANT Pneumatic air switch and 3-speed - this has a pneumatic on/off blower including a massage mode, automatic dry-out run when using a standard pneumatic air switch.

• G50-2AHT-S Pneumatic air switch, 3 speed and heater. This unit has a pneumatic on/off blower includiing massage mode, automatic dry-out when using a standard pneumatic air switch. The built-in heating element reduces cold air on start-up.

• G70-2NN-S 700 watt Genesis standard hot tub blower unit for an electronic control or touch pad.

• G70-2AN-S 700 watt Genesis blower with pneumatic air switch.

• G70-2HN-S 700 watt blower using a standard touchpad, and fitted with a built-in heater.

• G90-2NN-S 900 watt Genesis standard hot tub blower unit for an electronic control or touch pad.

• G90-2HN-S 900 watt Genesis blower with a heater, for use with an electronic control or touch pad - to take away the blast of cold air on start-up. If your hot tub uses a G90-2HJ-B blower, this was a special item made by ITT for Spaform, and this the one to replace it - but just ask us for more details.

• G90-2AN-S 900 watt blower with an airswitch connection - you probably have an air-button beside your bath or spa, and the small diameter air tube connects to the microswitch on this unit, for safety.

• G120-2NN-S 1200 watt Genesis standard hot tub blower for an electronic control or touch pad.

You may notice that your blower has a similar product number to one listed above, prefixed with GB, - for example GB50-2NN-S. The 'B' has recently been dropped from the model number, but the blowers remain the same!

If you'd like a leaflet about these, please e-mail us - info@swimfix.co.uk.

Packing and delivery are FREE at the prices shown, based on addresses in our standard area - please see our delivery terms.