SWIMFIX

Genesis Blowers - by Hydroair

Here we have a wide range of Genesis blowers straight from Hydroair in Denmark. Your blower might be marked 'ITT' - as the maker used to be known.

There have been various changes made over the years - if you don't see quite the model reference that your blower has, please contact us as we'd be pleased to help!

You might be looking for a new blower for a bath - and some are marked 'AIRBATH' which is brand name, not just a type. The company called Airbath was taken over by REVA Industries in Hull, but it is important to note that Airbath did carry out modifications to some Hydroair blowers, though not necessarily to all of them.

An Airbath label might show a silhouette of a reclining lady, and the Genesis G numbers could be the same as you see listed here. However, some Airbath units use remote speed and temperature controllers for a separate air heater, and you might find that the circuit-board on the blower has been changed too. In many cases Airbath used a standard Genesis blower (uses the 2NN suffix) which has only an earth plus two wires connected to the circuit board.

If you are not sure, please open the blue access hatch on your blower and send us a photo of the wires and circuit board, which we can check against a new Genesis blower. If your blower has been modified you might need to speak to REVA Industries about a replacement.


Hydroair Genesis G50 Blowers

The current 500 watt Genesis models available are as follows -

  • G50-2NN-S Standard 500 watt motor for an electronic control or touch pad.

  • G50-2HN-S Heater - 500 watt Genesis hot tub blower for an electronic touchpad, and with built-in heating element to warm the air on start-up.

  • G50-2VN-S Variable speed - 500 watt Genesis blower with a variable speed control and automatc dry-out run when used in conjunction with the special ITT touch pad number UK 01658a connected directly to the blower. No separate control panel is needed.

  • G50-2AN-S Air switch - 500 watt motor with a pneumatic on/off switch. NOW DISCONTINUED - We recommend either using the 900 watt motor, or a perseus equivalent, but remember this will draw more current

  • G50-2VH-S Variable speed and heater - 500 watt blower including variable massage mode and automatic dry-out mode when used in conjunction with ITT touch pad UK01658a connected driectly to the blower - no separate control panel is necessary. The blower has a built-in heating element to reduce cold air on start-up. NOW DISCONTINUED - We suggest the 700 watt equivalent, but remember this will draw more current.

  • G50-2AHT-S Pneumatic air switch, 3 speed and heater. This unit has a pneumatic on/off blower includiing massage mode, automatic dry-out when using a standard pneumatic air switch. The built-in heating element reduces cold air on start-up - NOW DISCONTINUED - We may have end of production stock of these, please check with us, but remember this will draw more current.

  • G50-AH-S Pneumatic on/off blower with a built-in heating element to warm the air on start-up - NOW DISCONTINUED - We may have end of production stock of these, please check with us, but remember this will draw more current.

Remember - if you cant see the model you need just let us know and we will find your best option! We also have a range of spares and accessories for these to help you install these with little fuss!


Hydroair Genesis G70 Blowers

The current 700 watt models are as follows -

  • G70-2NN-S 700 watt Genesis standard hot tub blower unit for an electronic control or touch pad.

  • G70-2HN-S 700 watt blower using a standard touchpad, and fitted with a built-in heater.

  • G70-2VH-S 700 watt Genesis blower with variable speed option and standard electric connection.

  • G70-2AN-S 700 watt Genesis blower with pneumatic air switch - DISCONTINUED - Hydroair suggest the G90-2AN-S, but remember this will draw higher current


Hydroair Genesis G90 Blowers

Current 900 Watt Genesis models available as follows -

  • G90-2NN-S 900 watt Genesis standard hot tub blower unit for an electronic control or touch pad.

  • G90-2HN-S 900 watt Genesis blower with a heater, for use with an electronic control or touch pad - to take away the blast of cold air on start-up. If your hot tub uses a G90-2HJ-B blower, this was a special item made by ITT for Spaform, and this the one to replace it - but just ask us for more details.

  • G90-2AN-S 900 watt blower with an airswitch connection - you probably have an air-button beside your bath or spa, and the small diameter air tube connects to the microswitch on this unit, for safety.

Remember - if you cant see the model you need just let us know and we will find your best option! We also have a range of spares and accessories for these to help you install these with little fuss!


Hydroair Genesis G120 Blowers

The current model of Genesis G120 Blower we offer is -

  • G120-2NN-S 1200 watt Genesis standard hot tub blower for an electronic control or touch pad.

These are also available with the pneumatic switch option, but are much more rare. Please let us know if you have a G120 with a different model number, and we will do our best to help!


 

Paypal This site uses PayPal and Secure Trading payment options to process your order securely. Secure Trading